Rare $0.50/1 Any Flatout Flatbread Item Coupon

Comments 12

1. 

   Diane July 26, 2013 at 5:11 pm MST

   It’s only for $.50

   Reply
2. 

   Marcee July 26, 2013 at 5:11 pm MST

   These are yummy!! Thank you 🙂 Have a fabulous weekend!

   Reply1
• 

  Collin (Mrs. Hip) July 26, 2013 at 5:33 pm MST

  You’re welcome! You have a great weekend too! 🙂

  Reply
3. 

   melony July 26, 2013 at 5:11 pm MST

   When I printed it was only $0.50 cents

   Reply
4. 

   Jenny July 26, 2013 at 5:19 pm MST

   Have to say mine said .50 cents too!

   Reply
5. 

   Angie July 26, 2013 at 5:25 pm MST

   .50 cents for me as well

   Reply
6. 

   Roy July 26, 2013 at 5:26 pm MST

   $.50 here too

   Reply
7. 

   Lora July 26, 2013 at 5:28 pm MST

   Same for me: Just 50c
   But still a great coupon

   Reply
8. 

   Collin (Mrs. Hip) July 26, 2013 at 5:32 pm MST

   Sorry, all! I just updated with the correct coupon value.

   Reply
9. 

   gollygee July 27, 2013 at 7:27 am MST

   Thanks for the coupon! Hopefully they will be BOGO soon.

   Question. When you print some single coupons there is an advertisement that prints as well. Is there a way to prevent this? I am somewhat successful in stopping the printer but am always afraid I will cut off the bottom of the coupon. TIA!

   Reply
10. 

    maflies1 July 27, 2013 at 8:44 am MST

    If it is the 1st print of your coupon and the coupon prints at the top of the page, cut or cleanly edge-tear enough of the paper to just print your coupon, plus a little extra (guess how I know this). Different printers are more picky than others, so until you know yours, put the sheet in so it feeds with the mnfg. cut. This way you don’t have to hit your ‘stop’ button.

    For the second print, I usually let it print and have my finger ready to hit the ‘stop’ button when it has printed a couple of lines below the Save .00 On Two. It may print some of the ad, but ad least it doesn’t cut the Q off. HTH

    Reply1
• 

  gollygee July 27, 2013 at 6:01 pm MST

  Great idea using a partial piece of paper! My printer is not picky about odd edges. I discovered this when I ran out of full size sheets and had to use whatever scraps I had lying around. Thank you!

  Reply